MATERIAL COMPATIBILITY
We strive to help you choose the right material for your wall mural project. Our products are designed to work on ideally prepared surfaces, preferably smooth walls with a high-quality paint and primer. While we do offer materials compatible with varying wall surface types, some paints may inhibit adhesion of peel-and-stick products, and some wall textures may not provide enough surface area to stick; a combination of those two make it even trickier. There are endless combinations of wall paint and wall textures out there and we can’t test all of them. If you're unsure, we recommend ordering swatches of our materials to test adhesion prior to installation. If you believe your wall surface may be a problem, please consider our pasted products, UltraStik™ (pre-pasted) and ProStik™ (requires paste), for a more universally compatible installation or take the necessary steps to properly prepare your wall surface as described in detail below.
Modern Paint Formulations: Some modern wall paints can make self-adhesive (peel and stick) murals more challenging to install. Washable, durable, low-VOC and No-VOC paints may contain additives which can inhibit proper mural adhesion. Proper cleaning and dry time of the wall surface with a mixture of isopropyl alcohol (70%) and water (30%) MAY significantly improve the adhesion. However, we highly recommend preparing the surface in advance using a primer/sealer product like Zinsser® Gardz® by Rust-Oleum®, which can be found at most hardware stores. Use this clear coat sealant to cover the area where the mural will be applied to the wall surface. Wait at least 24 hours (preferably longer) before installing the mural. If applying to newly painted walls, wait 10-14 days before installation. Unpainted drywall, or walls with inferior paint applications, may be problematic and need attention before beginning your mural installation. Contact Us if you have questions.
Wall Textures: Many walls have been treated with an added decorative texture like orange peel, knockdown, stipple, etc. For these wall surface textures, it is crucial that they are properly prepared and the right mural material is chosen for peel and stick materials. If possible, consider smoothing out your wall texture with a skim-coating of drywall compound before priming and painting; this will give the ideal wall surface with few imperfections. If skim-coating is not an option, sand any rough areas and eliminate as many high spots and ridges as possible, and consider applying a primer/sealer product like Zinsser® Gardz® by Rust-Oleum®, which can be found at most hardware stores. Use this clear coat sealant to cover the area where the mural will be applied to the wall surface. Wait at least 24 hours (preferably longer) before installing the mural.
**We aim to address customer concerns such as these and provide suggestions for the best mural experience for our customers. Magic Murals cannot accept, refund or replace returned murals due to incompatible wall surfaces. Ultimately, it is the customer’s responsibility to install a mural according to its instructions and take the necessary steps to properly prepare the wall surface prior to installation.**
COMPARE OUR MATERIALS
Our materials feature a matte finish for extremely vibrant colors and reduced glare. All our mural materials and inks are fire tested and safe for families.